 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
AD4080BBCZ 데이터시트(PDF) 26 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD4080BBCZ 데이터시트(HTML) 26 Page - Analog Devices |
|
|
26 / 95 page  Data Sheet AD4080 THEORY OF OPERATION analog.com Rev. 0 | 26 of 95 SOFTWARE RESET This reset method must only be used once the AD4080 is in an idle state, where conversions are not being clocked, and any existing conversion is completed. A software reset is achieved by issuing the following two writes to the Interface Configuration A register (see the Interface Configura- tion A Register section, Address 0x00): 1. Set SW_RESET and SW_RESETX bits to 1 by writing 0x81 to the register. 2. Then, issue another write command that sets either or both of those bits to 0. This action returns any previously configured registers to their default settings, except for the ADDR_ASCENSION bit from the Interface Configuration A register, which keeps its previous value. The contents of the FIFO, if any, are also not affected by the software reset. The ADDR_ASCENSION bit and FIFO data only return to their default settings after a hardware reset or a full power-up happens. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
