PM8621 datasheet(41/184 Pages) PMC

41 / 184 page

NSE-8G™ Standard Product Data Sheet

Preliminary

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use

Document ID: PMC-2010850, Issue 1

Functional Description

9.1

LVDS Overview

The LVDS family of cells allow the implementation of 777.6 Mbit/s LVDS links. A reference

clock of 77.76 MHz is required.

A generic LVDS link according to IEEE 1596.3-1996 is illustrated in Figure 7 below. The

transmitter drives a differential signal through a pair of 50

Ω characteristic interconnects, such as

board traces, backplane traces, or short lengths of cable. The receiver presents a 100

Ω

differential termination impedance to terminate the lines. Included in the standard is sufficient

common-mode range for the receiver to accommodate as much as 925 mV of common-mode

ground difference.

Figure 8 Generic LVDS Link Block Diagram

Ω

Zo=50

Ω

100Ω

Vop

Von

Vip

Vin

Transmitter

Interconnect

Receiver

Complete SERDES transceiver functionality is provided. Ten-bit parallel data is sampled by the

line rate divided-by-10 clock (77.76 MHz SYSCLK) and then serialized at the line rate on the

LVDS output pins by a 777.6 MHz clock synthesized from SYSCLK. Serial line rate LVDS data

is sampled and de-serialized to 10-bit parallel data. Parallel output transfers are synchronized to a

gated line rate divided-by-10 clock. The 10-bit data is passed to an 8B/10B decoding block. The

gating duty cycle is adjusted such that the throughput of the parallel interface equals the receive

input data rate (Line Rate +/- 100 ppm). It is expected that the clock source of the transmitter is

the same as the clock source of the receiver to ensure the data throughput at both ends of the link

are identical.

Data is guaranteed to contain sufficient transition density to allow reliable operation of the data

recovery units by 8B/10B block coding and decoding provided by the T8TE and R8TD blocks.

PM8621 데이터시트(PDF) 41 Page - PMC-Sierra, Inc