| 전자부품 데이터시트 검색엔진 |
|
PM8621 데이터시트(PDF) 42 Page - PMC-Sierra, Inc |
|
|
|||||||||||||||||||||||||||||
PM8621 데이터시트(HTML) 42 Page - PMC-Sierra, Inc |
|
42 / 184 page ![]() NSE-8G™ Standard Product Data Sheet Preliminary Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use 41 Document ID: PMC-2010850, Issue 1 At the system level, reliable operation will be obtained if proper signal integrity is maintained through the signal path and the receiver requirements are respected. Namely, a worst case eye opening of 0.7UI and 100 mV differential amplitude is needed. These conditions should be achievable with a system architecture consisting of board traces, two sets of backplane connectors, up to 1m of backplane interconnect. This assumes proper design of 100 Ω differential lines and minimization of discontinuities in the signal path. Due to power constraints, the output differential amplitude is approximately 350 mV The LVDS system is comprised of the LVDS Receiver (RXLV), LVDS Transmitter (TXLV), Transmitter reference (TXREF), data recovery unit (DRU), parallel to serial converter (PISO and Clock Synthesis Unit (CSU). 9.1.1 LVDS Receiver (RXLV) The RXLV block is a 777.6 Mbit/s Low Voltage Differential Signaling (LVDS) Receiver according to the IEEE 1596.3-1996 LVDS Specification. The RXLV block is the receiver in Figure 7, accepting 777.6 Mbit/s LVDS signals from the transmitter, over RP[X]/RN[X] pins, amplifying them and converting them to digital signals, then passing them to a data recovery unit (DRU). Holding to the IEEE 1596.3-1996 specification, the RXLV has a differential input sensitivity better than 100 mV, and includes at least 25 mV of hysteresis. There are 12 RXLV blocks in the NSE. 9.1.2 LVDS Transmitter (TXLV) The TXLV block is a 777.6 Mbit/s Low Voltage Differential Signaling (LVDS) Transmitter according to the IEEE 1596.3-1996 LVDS Specification. The TXLV accepts 777.6 Mbit/s differential data from a “parallel-in, serial-out” (PISO) circuit and then transmits the data off-chip as a LVDS on TP[X]/TN[X] pins. The TXLV uses a reference current and voltage from the TXREF block to control the output differential voltage amplitude and the output common-mode voltage. There are 12 instances of the TXLV block in the NSE-8G. 9.1.3 LVDS Transmit Reference (TXREF) The TXREF provides an on-chip bandgap voltage reference (1.20 V ±5%) and a precision current to the TXLV (777.6 Mbit/s LVDS Transmitter) block’s. The reference Voltage is used to control the common-mode level of the TXLV output, while the reference current is used to control the output amplitude. The precision currents are generated by forcing the reference Voltage across an external, off-chip 3.16 k Ω(±1%) resistor. The resulting current is then mirrored through several individual reference current outputs, so each TXLV receives its own reference current. There is one instance of the TXREF in the NSE-8G. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |