| 전자부품 데이터시트 검색엔진 |
|
SPC563M60X 데이터시트(PDF) 70 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPC563M60X 데이터시트(HTML) 70 Page - STMicroelectronics |
|
70 / 128 page ![]() Electrical characteristics SPC563M64x, SPC563M60x 70/128 DocID14642 Rev 12 4.3 Thermal characteristics 8. Internal structures hold the voltage greater than –1.0 V if the injection current limit of 2 mA is met. 9. Internal structures hold the input voltage less than the maximum voltage on all pads powered by VDDEH supplies, if the maximum injection current specification is met (2 mA for all pins) and VDDEH is within the operating voltage specifications. 10. Internal structures hold the input voltage less than the maximum voltage on all pads powered by VDDE supplies, if the maximum injection current specification is met (2 mA for all pins) and VDDE is within the operating voltage specifications. 11. Total injection current for all pins (including both digital and analog) must not exceed 25 mA. 12. Total injection current for all analog input pins must not exceed 15 mA. 13. Lifetime operation at these specification limits is not guaranteed. 14. Solder profile per CDF-AEC-Q100. 15. Moisture sensitivity per JEDEC test method A112. Table 10. Thermal characteristics for 144-pin LQFP Symbol C Parameter Conditions Value Unit RJA CC D Junction-to-Ambient, Natural Convection(1) Single layer board – 1s 43 °C/W RJA CC D Junction-to-Ambient, Natural Convection(2) Four layer board – 2s2p 35 °C/W RJMA CC D Junction-to-Ambient (@200 ft/min)(2) Single layer board –1s 34 °C/W RJMA CC D Junction-to-Ambient (@200 ft/min)(2) Four layer board – 2s2p 29 °C/W RJB CC D Junction-to-Board(2) 22 °C/W RJCtop CC D Junction-to-Case (Top)(3) 8°C/W JT CC D Junction-to-Package Top, Natural Convection(4) 2°C/W 1. Junction-to-Ambient Thermal Resistance determined per JEDEC JESD51-3 and JESD51-6. Thermal test board meets JEDEC specification for this package. 2. Junction-to-Board thermal resistance determined per JEDEC JESD51-8. Thermal test board meets JEDEC specification for the specified package. 3. Junction-to-Case at the top of the package determined using MIL-STD 883 Method 1012.1. The cold plate temperature is used for the case temperature. Reported value includes the thermal resistance of the interface layer. 4. Thermal characterization parameter indicating the temperature difference between the package top and the junction temperature per JEDEC JESD51-2. When Greek letters are not available, the thermal characterization parameter is written as Psi-JT. Table 11. Thermal characteristics for 176-pin LQFP Symbol C Parameter Conditions Value Unit RJA CC D Junction-to-Ambient, Natural Convection(1) Single layer board - 1s 38 °C/W RJA CC D Junction-to-Ambient, Natural Convection(2) Four layer board - 2s2p 31 °C/W RJMA CC D Junction-to-Moving-Air, Ambient(2) @200 ft./min., single layer board - 1s 30 °C/W RJMA CC D Junction-to-Moving-Air, Ambient(2) @200 ft./min., four layer board - 2s2p 25 °C/W RJB CC D Junction-to-Board(2) 20 °C/W |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |