M58LR128KB855 datasheet(91/110 Pages) NUMONYX

91 / 110 page

M58LR128KT, M58LR128KB, M58LR256KT, M58LR256KB

Flowcharts and pseudocodes

91/111

Appendix C

Flowcharts and pseudocodes

Figure 18.

Program flowchart and pseudocode

Status check of SR1 (Protected Block), SR3 (VPP Invalid) and SR4 (Program Error) can be made after each program

operation or after a sequence.

If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.

Any address within the bank can equally be used.

Write 40h or 10h (3)

AI06170b

Start

Write Address

& Data

Read Status

YES

SR7 = 1

YES

SR3 = 0

SR4 = 0

VPP Invalid

Error (1, 2)

Program

Error (1, 2)

program_command (addressToProgram, dataToProgram) {:

writeToFlash (addressToProgram, 0x40);

/*writeToFlash (addressToProgram, 0x10);*/

/*see note (3)*/

do {

status_register=readFlash (addressToProgram);

"see note (3)";

/* E or G must be toggled*/

} while (status_register.SR7== 0) ;

if (status_register.SR3==1) /*VPP invalid error */

error_handler ( ) ;

YES

End

YES

SR1 = 0

Program to Protected

Block Error (1, 2)

writeToFlash (addressToProgram, dataToProgram) ;

/*Memory enters read status state after

the Program Command*/

if (status_register.SR4==1) /*program error */

error_handler ( ) ;

if (status_register.SR1==1) /*program to protect block error */

error_handler ( ) ;

}

M58LR128KB855 데이터시트(PDF) 91 Page - Numonyx B.V

M58LR128KB855 데이터시트(HTML) 91 Page - Numonyx B.V

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL