TMS320DM647_0804 datasheet(34/182 Pages) TI

34 / 182 page

2.7 Device Support

2.7.1

Development Support

TMS320DM647/TMS320DM648

Digital Media Processor

SPRS372B – MAY 2007 – REVISED APRIL 2008

www.ti.com

Table 2-5. TERMINAL FUNCTIONS (GROUND and POWER SUPPLY) (continued)

TERMINAL

TYPE

INTERNAL

OPER

DESCRIPTION

NAME

PULLUP/PULL

VOLT

DOWN

RSV 19

Reserved. This pin must be connected to the 1.8-V I/O supply

(DVDD18) via a 200-Ω resistor for proper device operation.

NOTE: If the DDR2 Memory Controller is not used, the

DDR_VREF, RSV19, and RSV20 pins can be directly

connected to ground (VSS) to save power. However,

connecting these pins directly to ground will prevent boundary

scan from functioning on the DDR2 Memory Controller pins. To

preserve boundary-scan functionality on the DDR2 Memory

Controller pins, see Section 6.3.6.

RSV 20

Reserved. This pin must be connected to ground (VSS) via a

200-

Ω resistor for proper device operation.

NOTE: If the DDR2 Memory Controller is not used, the RSV 19

and RSV 20 pins can be directly connected to ground (VSS) to

save power. However, connecting these pins directly to ground

will prevent boundary scan from functioning on the DDR2

Memory Controller pins. To preserve boundary-scan

functionality on the DDR2 Memory Controller pins, see

Section 6.3.6.

RSV 21

Y12

Reserved. This pin must be connected via a 20-

Ω resistor

directly to 3.3-V I/O Supply (DVDD33) for proper device

operation. The resistor used should have a minimal rating of

250 mW.

RSV 22

W12

Reserved. This pin must be connected via a 40-

Ω resistor

directly to ground (VSS) for proper device operation. The

resistor used should have a minimal rating of 100 mW.

TI offers an extensive line of development tools for the TMS320DM64x DMP platform, including tools to

evaluate the performance of the processors, generate code, develop algorithm implementations, and fully

integrate and debug software and hardware modules. The tools support documentation is electronically

available within the Code Composer Studio™ Integrated Development Environment (IDE).

The following products support development of TMS320DM64xx DMP-based applications:

Software Development Tools:

Code Composer Studio™ Integrated Development Environment (IDE): including Editor

C/C++/Assembly Code Generation, and Debug plus additional development tools

Scalable, Real-Time Foundation Software (DSP/BIOS™), which provides the basic run-time target

software needed to support any SoC application.

Hardware Development Tools:

Extended Development System (XDS™) Emulator (supports TMS320DM64x DMP multiprocessor

system debug) EVM (Evaluation Module)

For a complete listing of development-support tools for the TMS320DM64x DMP platform, visit the

Texas Instruments web site on the Worldwide Web at http://www.ti.com uniform resource locator

(URL). For information on pricing and availability, contact the nearest TI field sales office or authorized

distributor.

Device Overview

Submit Documentation Feedback

TMS320DM647_0804 데이터시트(PDF) 34 Page - Texas Instruments

TMS320DM647_0804 데이터시트(HTML) 34 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL