11

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

9. Easy Start Valve: Releases the head build up pressure which will build when pull

starting the engine, and help it easier to start.

ASSEMBLY

FITTING THE WHEELS

1. Insert the axle into the frame as

shown.

• Rotate the axle so that the spring

loaded pin pops through the hole

on the frame.

2. Fit the wheels to the axles and

secure with the washers and locking

nuts supplied.

NOTE: DO NOT overtighten the

locking nuts, the wheels must

be able to rotate freely.

CONNECTING THE BATTERY

NOTE: The power washer comes with

the battery disconnected. The

battery is mounted on the rear of

the frame in its own chassis

1. Unscrew the blue negative ‘-’ terminal

and attach the blue negative cable,

reconnect and tighten the terminal.

2. Unscrew the red positive ‘+’ terminal

and attach the red positive cable,

reconnect and tighten the terminal.