33

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Water leaking at

pump

1) Loose connections

2) Piston packings worn

3) Worn or broken O

rings

4) Pump head or tubes

damaged from freezing

1) Tighten hose connections

2) Have parts cleaned or replaced by

an authorised CLARKE dealer

3) Check and replace O ring

4) Have parts cleaned or replaced by

an authorised CLARKE dealer

Water leaking at

spray gun/spray

wand connection

1) Worm or broken O ring

2) Loose hose

connection

1) Check and replace O ring

2) Tighten hose connections

Oil leaking at pump 1) Oil Seals worn

2) Loose drain plug

3) Worn drain plug O ring

4) Worn fill plug O ring

5) Pump overfilled

6) Incorrect oil used

7) Vent plug clogged

1) Have parts cleaned or replaced by

an authorised CLARKE dealer

2) Tighten drain plug

3) Inspect and replace O ring

4) Inspect and replace O ring

5) Check for correct oil amount

6) Drain and refill with correct type and

amount of oil

7) Clean vent plug. Use a blast of air to

free it of blockage. If problem persists,

replace vent plug

PROBLEM

PROBABLE CAUSE

SOLUTION