16

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHECKING THE ENGINE OIL LEVEL

1. Turn the oil filler cap/dipstick anti-

clockwise and remove it from the oil

filler tube.

2. Wipe the oil filler cap/dipstick with a

clean cloth.

3. Insert the oil filler cap/dipstick back

into the oil filler tube and then remove

it again. DO NOT screw it in when

doing this.

4. If the oil is low, fill the oil reservoir to

the edge of the oil filler hole, as

shown.

• We recommend the use of

SAE10W/30 oil in the engine.

5. Replace the oil filler cap.

CHECKING THE PUMP & GEARBOX OIL LEVEL

1. Look at the sight glass on the pump

and gearbox to check the oil levels

inside.

• The oil should be half way up the

sight glass.

WARNING: RUNNING THE ENGINE WITH INSUFFICIENT OIL WILL CAUSE

ENGINE DAMAGE.