25

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SHUTTING DOWN

1. Release the spray gun trigger and allow the engine to run unloaded for 3 minutes

before shutting down.

2. Loosen the engine speed control

knob anti-clockwise and slide the

knob up to the ‘STOP’ position.

Tighten the knob clockwise in the

‘STOP’ position.

3. Turn the engine switch key to the

‘OFF’ position and remove the key.

4. Rotate the fuel valve to the ‘OFF’

position.

5. Turn the water supply off.

6. Pull the trigger on the spray gun to

release any water pressure.

7. Engage the gun trigger safety switch.

8. See storage section on page 29 for

proper storage procedures.

NOTE: NEVER TURN THE WATER

OFF WITH THE ENGINE RUNNING.