| 전자부품 데이터시트 검색엔진 |
|
HD4046212RFS 데이터시트(PDF) 45 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD4046212RFS 데이터시트(HTML) 45 Page - Renesas Technology Corp |
|
45 / 157 page ![]() HD404629R Series 43 Notes: 2. When the MCU is in watch mode or subactive mode, if the high level period before the falling edge of INT 0 is shorter than the interrupt frame, INT0 is not detected. Also, if the low level period after the falling edge of INT 0 is shorter than the interrupt frame, INT0 is not detected. Edge detection is shown in figure 24. The level of the INT 0 signal is sampled by a sampling clock. When this sampled value changes to low from high, a falling edge is detected. In figure 25, the level of the INT 0 signal is sampled by an interrupt frame. In (a) the sampled value is low at point A, and also low at point B. Therefore, a falling edge is not detected. In (b), the sampled value is high at point A, and also high at point B. A falling edge is not detected in this case either. When the MCU is in watch mode or subactive mode, keep the high level and low level period of INT 0 longer than interrupt frame. High Low INT Sampling 0 Low Figure 24 Edge Detection A: Low B: Low INT Interrupt frame 0 A: High B: High INT Interrupt frame 0 (a) High level period (b) Low level period Figure 25 Sampling Example |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |