M16CSLASH1N datasheet(226/238 Pages) RENESAS

226 / 238 page

Rev.1.00

Oct 20, 2004

page 214 of 222

M16C/1N Group

REJ090007-0100Z

20. Precautionary Notes in Using the Device

20.6 CAN Module

20.6.1 Reading C0STR Register

The CAN module on the M16C/1N group updates the status of the C0STR register in a certain

period. When the CPU and the CAN module access to the C0STR register at the same time, the

CPU has the access priority; the access from the CAN module is disabled. Consequently, when

the updating period of the CAN module matches the access period from the CPU, the status of the

CAN module cannot be updated. (See Figure 20.2)

Accordingly, be careful about the following points so that the access period from the CPU should

not match the updating period of the CAN module:

1. There should be a wait time of 3fCAN or longer (see Table 20.1) before the CPU reads the C0STR

2. When the CPU polls the C0STR register, the polling period must be 3fCAN or longer. (See Figure

20.4)

Table 20.1 CAN Module Status Updating Period

3fCAN period = 3 X XIN (Original oscillation period) X Division value of the CAN clock (CCLK)

(Example 1) Condition XIN 16MHz CCLK: Divided by 1

3fCAN period = 3 X 62.5 ns X 1= 187.5 ns

(Example 2) Condition XIN 16MHz CCLK: Divided by 2

3fCAN period = 3 X 62.5 ns X 2= 375 ns

(Example 3) Condition XIN 16MHz CCLK: Divided by 4

3fCAN period = 3 X 62.5 ns X 4= 750 ns

(Example 4) Condition XIN 16MHz CCLK: Divided by 8

3fCAN period = 3 X 62.5 ns X 8= 1.5 µs

(Example 5) Condition XIN 16MHz CCLK: Divided by 16

3fCAN period = 3 X 62.5 ns X 16= 3 µs

M16C/1N 데이터시트(PDF) 226 Page - Renesas Technology Corp