| 전자부품 데이터시트 검색엔진 |
|
7733 데이터시트(PDF) 180 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 데이터시트(HTML) 180 Page - Renesas Technology Corp |
|
180 / 940 page ![]() TIMER B 7733 Group User’s Manual 7–17 7.4 Event counter mode (Bits 1 and 0 of timer Bi mode register = “012”) In this mode, an external signal is counted. (Refer to Table 7.4.1.) Figure 7.4.1 shows the structures of the timer Bi mode register and timer Bi register in the event counter mode. Table 7.4.1 Specifications of event counter mode Specifications q External signal input to pin TBiIN (Notes 1 and 2). q “Falling edge,” “Rising edge,” or “Falling and Rising edges” can be selected as the valid edge of the count source by software. q Countdown q At an underflow, the reload register’s contents is reloaded, and counting is continued. n: Set value in the timer Bi register When the count start flag is set to “1.” When the count start flag is cleared to “0.” At an underflow Count source input A counter value can be read out by reading the timer Bi register. s While counting is stopped When a value is written to the timer Bi register, it is written to both of the reload register and counter. s While counting is in progress When a value is written to the timer Bi register, it is written only to the reload register. (Transferred to the counter at the next reload time.) Item Count source Count operation Division ratio Count start condition Count stop condition Interrupt request occurrence timing Pin TBiIN’s function Read from timer Write to timer 1 (n + 1) Notes 1: When the timer B1 internal connect selection bit (bit 2 at address 6D16) = “1,” timer B1 counts the timer B2’s underflow signal. (Refer to section “7.4.3 Selectable functions.”) 2: When using timer B2 in the event counter mode, set both of the port-Xc selection bit (bit 4 at address 6C16) and the sub-clock output selection bit/Timer B2 clock source selection bit (bit 1 at address 6D16) to “0.” When one of or both of these bits = “1,” timer B2 functions as a clock timer. (Refer to section “7.6 Clock timer.”) 7.4 Event counter mode |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |