 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
7733 데이터시트(PDF) 274 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 데이터시트(HTML) 274 Page - Renesas Technology Corp |
|
|
274 / 940 page  A-D CONVERTER 7733 Group User’s Manual 9–9 (1) Interrupt priority level selection bits (bits 2 to 0) These bits select an A-D conversion interrupt’s priority level. When using A-D conversion interrupts, select one priority level from levels 1 to 7. If an A-D conversion interrupt request occurs, its priority level is compared with the processor interrupt priority level (IPL), and the requested interrupt is enabled only when its priority level is higher than the IPL. (Note that this is applied to the case where the interrupt disable flag (I) = “0.”) When disabling A-D conversion interrupts, set these bits to “0002” (Level 0). (2) Interrupt request bit (bit 3) This bit is set to “1” when an A-D conversion interrupt request occurs. This bit is automatically cleared to “0” when the A-D conversion interrupt request is accepted. Note that this bit can be set to “1” or cleared to “0” by software. 9.2 Block description |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
