ATmega162 datasheet(176/324 Pages) ATMEL

176 / 324 page

176

2513K–AVR–07/09

ATmega162/V

Receiving Frames with

5 to 8 Data Bits

The Receiver starts data reception when it detects a valid start bit. Each bit that follows the start

bit will be sampled at the baud rate or XCK clock, and shifted into the Receive Shift Register until

the first stop bit of a frame is received. A second stop bit will be ignored by the Receiver. When

the first stop bit is received, i.e., a complete serial frame is present in the Receive Shift Register,

the contents of the Shift Register will be moved into the receive buffer. The receive buffer can

then be read by reading the UDR I/O location.

The following code example shows a simple USART receive function based on polling of the

Receive Complete (RXC) Flag. When using frames with less than eight bits the most significant

bits of the data read from the UDR will be masked to zero. The USART has to be initialized

before the function can be used.

Note:

1. The example code assumes that the part specific header file is included.

The function simply waits for data to be present in the receive buffer by checking the RXC Flag,

before reading the buffer and returning the value.

Assembly Code Example(1)

USART_Receive:

; Wait for data to ?e received

sbis

UCSRA, RXC

rjmp

USART_Receive

; Get and return re?eived data from buffer

r16, UDR

ret

C Code Example

(1)

unsigned char

USART_Receive( void )

{

/* Wait for data to?be received */

while

( !(UCSRA & (?<<RXC)) )

;

/* Get and return r?ceived data from buffer */

return

UDR;

}

ATmega162 데이터시트(PDF) 176 Page - ATMEL Corporation

ATmega162 데이터시트(HTML) 176 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL