| 전자부품 데이터시트 검색엔진 |
|
WM9093ECS/R 데이터시트(PDF) 46 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM9093ECS/R 데이터시트(HTML) 46 Page - Wolfson Microelectronics plc |
|
46 / 84 page ![]() WM9093 Production Data w PD, March 2012, Rev 4.2 46 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R21 (15h) IN3 Line Control 0 IN3_CLAMP 1 IN3+ and IN3- input pad VMID clamp 0 = Clamp de-activated 1 = Clamp activated R22 (16h) IN1 Line Control 0 IN1_CLAMP 1 IN1+ and IN1- input pad VMID clamp 0 = Clamp de-activated 1 = Clamp activated R23 (17h) IN2 Line Control 0 IN2_CLAMP 1 IN2+ and IN2- input pad VMID clamp 0 = Clamp de-activated 1 = Clamp activated R57 (39h) AntiPOP2 3 VMID_BUF_ENA 1 VMID Buffer Enable 0 = Disabled 1 = Enabled Table 23 Input VMID Clamps HEADPHONE ENABLE/DISABLE The ground-referenced headphone outputs implement Wolfson’s SilentSwitch™ technology to minimise pop noise associated with enabling and disabling. The output pins HPL and HPR are shorted to GND by default while the individual driver stages are enabled. As a final step the short circuit is then removed on each of these paths by setting the applicable fields HPOUT1L_RMV_SHORT and HPOUT1R_RMV_SHORT. The ground-referenced Headphone output drivers are designed to suppress pops and clicks when enabled or disabled. However, it is necessary to control the drivers in accordance with a defined sequence in start-up and shut-down to achieve the pop suppression. It is also necessary to schedule the DC Servo offset correction at the appropriate point in the sequence (see “DC Servo”). Table 24 and Table 25 describe the recommended sequences for enabling and disabling these output drivers. SEQUENCE HEADPHONE ENABLE Step 1 HPOUT1L_ENA = 1 HPOUT1R_ENA = 1 Step 2 HPOUT1L_DLY = 1 HPOUT1R_DLY = 1 Step 3 DC offset correction Step 4 HPOUT1L_OUTP = 1 HPOUT1L_RMV_SHORT = 1 HPOUT1R_OUTP = 1 HPOUT1R_RMV_SHORT = 1 Table 24 Headphone Output Enable Sequence SEQUENCE HEADPHONE DISABLE Step 1 HPOUT1L_RMV_SHORT = 0 HPOUT1L_DLY = 0 HPOUT1L_OUTP = 0 HPOUT1R_RMV_SHORT = 0 HPOUT1R_DLY = 0 HPOUT1R_OUTP = 0 Step 2 HPOUT1L_ENA = 0 HPOUT1R_ENA = 0 Table 25 Headphone Output Disable Sequence |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |