WM8952ECSSLASHRV datasheet(41/72 Pages) WOLFSON

부품명	WM8952ECS/RV

상세설명	Mono ADC with Microphone Pre-amplifier

PDF	72 Pages

Scroll/Zoom	100%

제조업체	WOLFSON [Wolfson Microelectronics plc]

홈페이지	http://www.wolfsonmicro.com

Logo

41 / 72 page

Pre Production

WM8952

PP, Rev 3.1, June 2011

In I2S mode, the MSB is available on the second rising edge of BCLK following a FRAME transition.

The other bits up to the LSB are then transmitted in order. Depending on word length, BCLK

frequency and sample rate, there may be unused BCLK cycles between the LSB of one sample and

the MSB of the next.

Figure 21 I2S Audio Interface (assuming n-bit word length)

In DSP/PCM mode, the left channel MSB is available on either the 1st (Mode B) the 2nd (Mode A)

rising edge of BCLK (selectable by FRAMEP) following a rising edge of FRAME. Right channel data

immediately follows left channel data. Depending on word length, BCLK frequency and sample rate,

there may be unused BCLK cycles between the LSB of the right channel data and the next sample.

FRAMEP should be set to 0 in this mode.

Figure 22 DSP/PCM Mode Audio Interface (Mode A, FRAMEP=0)

Figure 23 DSP/PCM Mode Audio Interface (Mode B, FRAMEP=1)

WM8952ECS/RV 데이터시트(PDF) 41 Page - Wolfson Microelectronics plc