FDC37C78-HT datasheet(69/82 Pages) MICROCHIP

69 / 82 page

CR0D

This register can only be accessed in the Configuration Mode and after the CSR has been initialized to

0DH. This register is read only. This is the Device ID. The default value of this register after power up is

78H.

CR0E

This register can only be accessed in the Configuration Mode and after the CSR has been initialized to

0EH. This register is read only. The default value of this register after power up is 00H. This is used to

identify the chip revision level.

CR0F

This

can

only be accessed in the Configuration

Mode

and

after

the CSR has

been initialized to 0FH. The default value of this register after power up is 00H. This is a test register and

must be left as 00H.

Table 42 - CR0F

BIT NO.

BIT NAME

DESCRIPTION

0:7

Reserved

Reserved For Test

CR10

This register can only be accessed in the Configuration Mode and after the CSR has been initialized

to 10H. The default value of this register after power up is 00H. This is a test register and must be left as

00H.

Table 43 - CR10

BIT NO.

BIT NAME

DESCRIPTION

0:7

Reserved

Reserved For Test

CR11

This register can only be accessed in the Configuration Mode and after the CSR has

been initialized to 11H. The default value of this register after power up is 00H. This is a test register and

must be left as 00H.

Table 44 - CR11

BIT NO.

BIT NAME

DESCRIPTION

0:7

Reserved

Reserved For Test

CR12-CR1E

These registers are reserved. The default value of these registers after power up is 00H.

FDC37C78-HT 데이터시트(PDF) 69 Page - Microchip Technology

FDC37C78-HT 데이터시트(HTML) 69 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

데이터시트 다운로드

링크 URL