| 전자부품 데이터시트 검색엔진 |
|
LAN9500AI 데이터시트(PDF) 34 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9500AI 데이터시트(HTML) 34 Page - Microchip Technology |
|
34 / 213 page ![]() LAN950x DS00001875A-page 34 2010 - 2015 Microchip Technology Inc. Note 5-11 This value is loaded from the EEPROM. A Full-Speed and Hi-Speed polling interval exists. If no EEPROM exists than this value defaults to 04h for HS and 01h for FS. 5.3.1.6.7 Other Speed Configuration Descriptor The fields in this descriptor are derived from Configuration Descriptor information that is stored in the EEPROM. Note 5-12 Value is loaded from EEPROM, but must be equal to the Default Value in order to comply with the USB 2.0 Specification and provide for normal device operation. Specification of any other value will result in unwanted behavior and untoward operation. Note 5-13 Default value is 01h in Self Powered mode and FAh in Bus Powered mode. 04h wMaxPacketSize 2 10h No Maximum Packet Size this endpoint is capable of sending. 06h bInterval 1 Note 5-11 Yes Interval for polling endpoint data transfers. TABLE 5-10: OTHER SPEED CONFIGURATION DESCRIPTOR Offset Field Size (Bytes) Default Value Loaded from EEPROM Description 00h bLength 1 09h Note 5-12 Size of Descriptor in bytes (9 bytes) 01h bDescriptorType 1 07h Note 5-12 Other Speed Configuration Descriptor (0x07) 02h wTotalLength 2 0027h Note 5-12 Total length in bytes of data returned (39 bytes) 04h bNumInterfaces 1 01h Note 5-12 Number of Interfaces 05h bConfigurationValue 1 01h Note 5-12 Value to use as an argument to select this configuration 06h iConfiguration 1 00h Yes Index of String Descriptor describing this configuration 07h bmAttributes 1 A0h Yes Bus powered and remote wakeup enabled. 08h bMaxPower 1 Note 5-13 Yes Maximum Power Consumption is 500 mA. Note: EEPROM values are obtained for the Configuration Descriptor at the other USB speed. I.e., if the current operating speed is FS, then the HS Configuration Descriptor values are used, and vice-versa. Note: The PWR_SEL and RMT_WKP straps affect the default value of bmAttributes. TABLE 5-9: ENDPOINT 3 DESCRIPTOR (CONTINUED) Offset Field Size (Bytes) Default Value Loaded from EEPROM Description |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |