LAN9500AI datasheet(96/213 Pages) MICROCHIP

96 / 213 page

LAN950x

DS00001875A-page 96

 2010 - 2015 Microchip Technology Inc.

5.8.4

ENABLE DESCRIPTOR RAM AND FLAG ATTRIBUTE REGISTERS AS SOURCE

The EEPROM Emulation Enable (EEM) bit of the Hardware Configuration Register (HW_CFG) must be configured by

the software device driver to use the Descriptor RAM and the Attribute Registers for custom operation. Upon assertion

of EEPROM Emulation Enable (EEM), the hardware will utilize the Descriptor information contained in the Descriptor

RAM, the Attributes Registers, and the values of the items listed in Section 5.8.1 to facilitate custom operation.

5.8.5

INHIBIT RESET OF SELECT SCSR ELEMENTS

The software device driver must take care to ensure that the contents of the Descriptor RAM and SCSR register content

critical to custom operation using Descriptor RAM are preserved across reset operations other than POR. The driver

must configure the Reset Protection (RST_PROTECT) bit of the Hardware Configuration Register (HW_CFG) in order

to accomplish this.

The following registers have contents that can be preserved across all resets other than POR. Consult the register’s

description for additional details.

• Descriptor RAM

• Attribute Registers

FIGURE 5-28:

DESCRIPTOR RAM EXAMPLE

Language ID Descriptor

Manufacturing String Descriptor

Product Name String Descriptor

Serial Number String Descriptor

Configuration String Descriptor

Interface String Descriptor

HS Device Descriptor

HS Configuration and Interface Descriptor

FS Device Descriptor

FS Configuration and Interface Descriptor

DATAPORT

ADDR

= Unused Space Required For Alignment Purposes

LAN9500AI 데이터시트(PDF) 96 Page - Microchip Technology