 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
SPEAR600 데이터시트(PDF) 68 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPEAR600 데이터시트(HTML) 68 Page - STMicroelectronics |
|
|
68 / 97 page  Timing characteristics SPEAr600 68/97 Doc ID 16259 Rev 3 Input path: tSETUP = tSETUP_FF + tIN(max) + tCK_PAD(max) - tCK_FF tHOLD = tHOLD_FF - tIN(min) - tCK_PAD(min) + tCK_FF Output Path: tmax = (tOUT + tCK_FF)(max) - tCK_PAD(min) tmin = (tOUT + tCK_FF)(min) - tCK_PAD(max) Note: For tSETUP, tHOLD and tmax are taken the maximum value from worst case and best case, while the minimum value is taken for tmin. 6.2.2 Pad delay enabled Figure 13. EXPI pad delay enabled block diagram Note: The pad of the clock is disabled or enabled using the expi_clk_retim bit in the EXPI_CLK_CFG register. Refer to the MISC registers chapter of the user manual). HSIZE,HWRITE, HBURST, HTRANS, HLOCK, HBUSREQ, 7.02 -1.94 HWDATA 6.17 -1.94 Output tmin(ns) tmax(ns) HGRANT, HReady_mst(43), HRESP -0.66 4.21 HRDATA -1.09 7.34 Table 39. SOC-slave (continued) Input Q Q SET CL R D tout tck_pad CLK PL_GPIO[x] tin Q Q SET CL R D PL_CLK1 tck_ff |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
