| 전자부품 데이터시트 검색엔진 |
|
PC87372 데이터시트(PDF) 89 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87372 데이터시트(HTML) 89 Page - National Semiconductor (TI) |
|
89 / 144 page ![]() 6.0 System Wake-Up Control (SWC) (Continued) 89 www.national.com Revision 1.2 6.4.7 General-Purpose Status 1 Register 3 (GPE1_STS_3) This register contains “child” events 24-31 of the GPE1_STS register. The status bits behave according to the Sticky Status Bit definition in the ACPI Specification (i.e., the bit is set when the level of the hardware signal is high and is only cleared by the software writing 1 to it). Power Well: VSB3 Location: Offset 0Bh Type: R/W1C Bit 76543210 Name Reserved MOD_IRQ _STS MS_IRQ _STS KBD_IRQ _STS Reserved Reset 00000000 Bit Description 7-5 Reserved. 4 MOD_IRQ_STS (Modules IRQ Event Status). Indicates that an IRQ was generated by one of the Legacy modules (FDC, Parallel Port, Serial Port) or the Fan Speed Monitor. This bit is set only if the IRQ is enabled for wake-up (bit 4 of the Standard configuration register at index 70h) and the related module is active; see Section 3.2.3 on page 32. Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled IRQ from one of the Legacy modules or the Fan Speed Monitor is active 3 MS_IRQ_STS (Mouse IRQ Event Status). Indicates that an IRQ was generated by the mouse interface section of the KBC module. This bit is set only if the IRQ is enabled for wake-up (bit 4 of the Mouse Logical Device configuration register at index 70h) and the KBC module is active (see Section 3.2.3 on page 32). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled IRQ from the mouse interface section of the KBC module is active 2 KBD_IRQ_STS (Keyboard IRQ Event Status). Indicates that an IRQ was generated by the keyboard interface section of the KBC module. This bit is set only if the IRQ is enabled for wake-up (bit 4 of the Keyboard Logical Device configuration register at index 70h) and the KBC module is active (see Section 3.2.3 on page 32). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled IRQ from the keyboard interface section of the KBC module is active 1-0 Reserved. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |