| 전자부품 데이터시트 검색엔진 |
|
SSD1963QL9R 데이터시트(PDF) 31 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
SSD1963QL9R 데이터시트(HTML) 31 Page - List of Unclassifed Manufacturers |
|
31 / 93 page ![]() SSD1963 Rev 1.1 P 31/93 Jan 2010 Solomon Systech SP[15:8] : Start page (row) number high byte (POR = 00000000) SP[7:0] : Start page (row) number low byte (POR = 00000000) EP[15:8] : End page (row) number high byte (POR = 00000000) EP[7:0] : End page (row) number low byte (POR = 00000000) Note : SP[15:0] must always be equal to or less than EP[15:0] Figure 9-4: Set Page Address example SP[15:0] EP[15:0] 9.18 write_memory_start Command 0x2C Parameters None D/C D7 D6 D5 D4 D3 D2 D1 D0 Hex Command 0 0 0 1 0 1 1 0 0 2C Description Transfer image information from the host processor interface to the SSD1963 starting at the location provided by set_column _address (0x2A) and set _page_address (0x2B). If set_address_mdoe (0x36) A[5] = 0: The column and page address are reset to the Start Column (SC) and Start Page (SP), respectively. Pixel Data 1 is stored in frame buffer at (SC, SP). The column address is then incremented and pixels are written to the frame buffer until the column address equals the End Column (EC) value. The column address is then reset to SC and the page address is incremented. Pixels are written to the frame buffer until the page address equals the End Page (EP) value and the column address equals the EC value, or the host processor sends another command. If the number of pixels exceeds (EC – SC + 1) * (EP – SP + 1) the extra pixels are ignored. If set_address_mode (0x36) A[5] = 1: The column and page address are reset to the Start Column (SC) and Start Page (SP), respectively. Pixel Data 1 is stored in frame buffer at (SC, SP). The page address is then incremented and pixels are written to the frame buffer until the page address equals the End Page (EP) value. The page address is then reset to SP and the column address is incremented. Pixels are written to the frame buffer until the column address equals the End column (EC) value and the page address equals the EP value, or the host processor sends another command. If the number of pixels exceeds (EC – SC + 1) * (EP – SP + 1) the extra pixels are ignored. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |