STM8S datasheet(442/467 Pages) STMICROELECTRONICS

부품명	STM8S

상세설명	STM8S Series and STM8AF Series 8-bit microcontrollers

PDF	467 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

442 / 467 page

Analog/digital converter (ADC)

RM0016

442/467

DocID14587 Rev 14

24.11.2

ADC data buffer register x low (ADC_DBxRL) (x=or 0..7 or 0..9)

Address offset: 0x01 + 2 * channel number

Reset value: 0x00

Note:

Data buffer registers are not available for ADC2. The data buffer size and base address are

device dependent and are specified in the corresponding datasheet. Note that the data

buffer registers and the other ADC registers have different base addresses.

654

3210

DBL[7:0]

rrr

rrrr

Bits 7:0 DBL[7:0] Data bits low

These bits are set/reset by hardware and are read only. When the ADC is in

buffered continuous or scan mode, they contain the low part of the A/D

conversion result, in right-aligned or left-aligned format depending on the

ALIGN bit.

Left Data Alignment

These bits contain the (eight ADC data width) LSB bits of the converted data.

Remaining bits of the register are tied to zero.

See Figure 165.

Right Data Alignment

These bits contain the eight LSB bits of the converted data.

STM8S 데이터시트(PDF) 442 Page - STMicroelectronics