 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
STM8S 데이터시트(PDF) 446 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM8S 데이터시트(HTML) 446 Page - STMicroelectronics |
|
|
446 / 467 page  Analog/digital converter (ADC) RM0016 446/467 DocID14587 Rev 14 24.11.6 ADC configuration register 3 (ADC_CR3) Address offset: 0x23 Reset value: 0x00 Note: This register is not available for ADC2. 7 654 3210 DBUF OVR Reserved rw rc_w0 r Bit 7 DBUF: Data buffer enable This bit is set and cleared by software. It is used together with the CONT bit enable buffered continuous mode (DBUF=1, CONT=1). When DBUF is set, converted values are stored in the ADC_DBxRH and ADC_DBxRL registers instead of the ADC_DRH and ADC_DRL registers. 0: Data buffer disabled 1: Data buffer enabled Bit 6 OVR: Overrun flag This bit is set by hardware and cleared by software. 0: No overrun 1: An overrun was detected in the data buffer registers. Refer to Section 24.5.5 on page 433 for more details. Bits 5:0 Reserved, must be kept cleared. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
