전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

W5100 데이터시트(PDF) 63 Page - WIZnet Co., Ltd

부품명 W5100
상세설명  Single-chip Internet-enabled 10/100 Ethernet Controller
PDF  72 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  WIZNET [WIZnet Co., Ltd]
홈페이지  https://www.wiznet.io/ko/Product/
Logo WIZNET - WIZnet Co., Ltd

W5100 데이터시트(HTML) 63 Page - WIZnet Co., Ltd

Back Button W5100 Datasheet HTML 59Page - WIZnet Co., Ltd W5100 Datasheet HTML 60Page - WIZnet Co., Ltd W5100 Datasheet HTML 61Page - WIZnet Co., Ltd W5100 Datasheet HTML 62Page - WIZnet Co., Ltd W5100 Datasheet HTML 63Page - WIZnet Co., Ltd W5100 Datasheet HTML 64Page - WIZnet Co., Ltd W5100 Datasheet HTML 65Page - WIZnet Co., Ltd W5100 Datasheet HTML 66Page - WIZnet Co., Ltd W5100 Datasheet HTML 67Page - WIZnet Co., Ltd Next Button
Zoom Inzoom in Zoom Outzoom out
 63 / 72 page
background image
© Copyright 2009-2011 WIZnet Co., Inc. All rights reserved.
62
6.3.1 Device Operations
The W5100 is controlled by a set of instruction that is sent from a host controller, commonly
referred to as the SPI Master. The SPI Master communicates with W5100 via the SPI bus which
is composed of four signal lines: Slave Select(/SS), Serial Clock(SCLK), MOSI(Master Out Slave
In), MISO(Master In Slave Out).
The SPI protocol defines four modes for its operation (Mode 0, 1, 2, 3). Each mode differs
according to the SCLK polarity and phase - how the polarity and phase control the flow of
data on the SPI bus.
The W5100 operates as SPI Slave device and supports the most common mode - SPI Mode 0.
With SPI Mode 0, data is always latched in on the rising edge of SCLK and always output on
the falling edge of SCLK.
6.3.2 Commands
According to SPI protocol, there are only two data lines used between SPI devices. So, it is
necessary to define OP-Code. W5100 uses two types of OP-Code - Read OP-Code and Write
OP-Code. Except for those two OP-Codes, W5100 will be ignored and no operation will be
started.
In SPI Mode, W5100 operates in “unit of 32-bit stream”.
The unit of 32-bit stream is composed of 1 byte OP-Code Field, 2 bytes Address Field and 1
byte data Field.
OP-Code, Address and data bytes are transferred with the most significant bit(MSB) first and
least significant bit(LSB) last. In other words, the first bit of SPI data is MSB of OP-Code Field
and the last bit of SPI data is LSB of Data-Field. W5100 SPI data format is as below.
Command
OP-Code Field
Address Field
Data Field
Write operation
0xF0
1111 0000
2 bytes
1 byte
Read operation
0x0F
0000 1111
2 bytes
1 byte



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com