| 전자부품 데이터시트 검색엔진 |
|
W5100 데이터시트(PDF) 37 Page - WIZnet Co., Ltd |
|
|
|||||||||||||||||||||||||||||
W5100 데이터시트(HTML) 37 Page - WIZnet Co., Ltd |
|
37 / 72 page ![]() © Copyright 2009-2011 WIZnet Co., Inc. All rights reserved. 36 Sn_RX_RSR (RX Received Size Register) [R] [0x0426-0x0427, 0x0526-0x0527, 0x0626- 0x0627, 0x0726-0x0727] [0x0000] This register notifies the data size received in RX Memory. As this value is internally calculated with the values of Sn_RX_RD and Sn_RX_WR, it is automatically changed by RECV command of Socket n Command Register(Sn_CR) and receiving data for remote peer. When reading this register, user should read upper byte(0x0426,0x0526,0x0626,0x0726) first and lower byte(0x0427,0x0527,0x0627,0x0727) later to get the correct value. Ex) In case of 2048(0x0800) in S0_RX_RSR, 0x0426 0x0427 0x08 0x00 The total size of this value can be decided according to the value of RX Memory Size Register. Sn_RX_RD (Socket n RX Read Pointer Register) [R/W] [0x0428-0x0429, 0x0528-0x0529, 0x0628-0x0629, 0x0728-0x0729] [0x0000] This register offers the location information to read the receiving data. When reading this register, user should read upper byte (0x0428, 0x0528, 0x0628, 0x0728) first and lower byte (0x0429, 0x0529, 0x0629, 0x0729) later to get the correct value. It has a random value as its initial value. Caution: This register value is changed after the successfully executed receive command to Sn_CR. Ex) In case of 2048(0x0800) in S0_RX_RD, 0x0428 0x0429 0x08 0x00 But this value itself is not the physical address to read. So, the physical address should be calculated as follow. 1. Socket n RX Base Address (hereafter we'll call gSn_RX_BASE) and Socket n RX Mask Address (hereafter we'll call gSn_RX_MASK) are calculated on RMSR value. Refer to the pseudo code of the 5.1 Initialization if the detail is needed. 2. The bitwise-AND operation of two values, Sn_RX_RD and gSn_RX_MASK give result the offset address(hereafter we'll call get_offset), in RX memory range of the socket. 3. Two values get_offset and gSn_RX_BASE are added together to give result the physical address(hereafter, we'll call get_start_address). Now, read the receiving data from get_start_address as large as you want. (* There's a case that it exceeds the RX memory upper-bound of the socket while reading. In this case, read the receiving data to the upper-bound, and change the physical address to the gSn_RX_BASE. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |