| 전자부품 데이터시트 검색엔진 |
|
AM79C978AVCW 데이터시트(PDF) 151 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM79C978AVCW 데이터시트(HTML) 151 Page - Advanced Micro Devices |
|
151 / 256 page ![]() Am79C978A 151 This bit is always read/write ac- cessible. PSE is set to 1 by H_RESET and is not affected by S_RESET or setting the STOP bit. 6 LNKSE Link Status Enable. When this bit is set, a value of 1 will be passed to the LEDOUT bit in this register in Link Pass state. This bit is always read/write ac- cessible. LNKSE is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 5 RCVME Receive Match Status Enable. When this bit is set, a value of 1 is passed to the LEDOUT bit in this register when there is receive ac- tivity on the network that has passed the address match func- tion for this node. All address matching modes are included: physical, logical filtering, broad- cast, and promiscuous. This bit is always read/write ac- cessible. RCVME is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 4 XMTE Transmit Status Enable. When this bit is set, a value of 1 is passed to the LEDOUT bit in this register when there is transmit activity on the network. This bit is always read/write ac- cessible. XMTE is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 3 POWER Power. When this bit is set to 1, the device is operating in HIGH power mode. 2 RCVE Receive Status Enable. When this bit is set, a value of 1 is passed to the LEDOUT bit in this register when there is receive activity on the network. This bit is always read/write ac- cessible. RCVE is set to 1 by H_RESET and is not affected by S_RESET or setting the STOP bit. 1 SPEED Speed. When this bit is set to 1, the device is operating in HIGH speed mode. 0 COLE Collision Status Enable. When this bit is set, a value of 1 is passed to the LEDOUT bit in this register when there is collision activity on the network. This bit is always read/write ac- cessible. COLE is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. BCR7: LED3 Status BCR7 controls the function(s) that the LED3 pin dis- plays. Multiple functions can be simultaneously enabled on this LED pin. The LED display will indicate the logical OR of the enabled functions. BCR7 defaults to Transmit Status (XMT) with pulse stretcher enabled (PSE = 1) and is fully programmable. Note: When LEDPE (BCR2, bit 12) is set to 1, pro- gramming of the LED3 Status register is enabled. When LEDPE is cleared to 0, programming of the LED3 register is disabled. Writes to those registers will be ignored. Note: Bits 15-0 in this register are programmable through the EEPROM. Bit Name Description 31-16 RES Reserved locations. Written as zeros and read as undefined. 15 LEDOUT This bit indicates the current (non-stretched) value of the LED output pin. A value of 1 in this bit indicates that the OR of the en- abled signals is true. The logical value of the LEDOUT status signal is determined by the settings of the individual Status Enable bits of the LED register (bits 8 and 6-0). This bit is read accessible al- ways. This bit is read only; writes have no effect. LEDOUT is unaf- fected by H_RESET, S_RESET, or STOP. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |