SH7041A datasheet(83/923 Pages) RENESAS

부품명	SH7041A

상세설명	Renesas 32-Bit Single-Chip RISC Microprocessor SuperH RISC engine Family/SH7040 Series(CPU Core SH-2)

PDF	923 Pages

Scroll/Zoom	100%

제조업체	RENESAS [Renesas Technology Corp]

홈페이지	http://www.renesas.com

Logo

83 / 923 page

Section 2 CPU

2.1

The register set consists of sixteen 32-bit general registers, three 32-bit control registers and four

32-bit system registers.

2.1.1

General Registers (Rn)

The sixteen 32-bit general registers (Rn) are numbered R0–R15. General registers are used for

data processing and address calculation. R0 is also used as an index register. Several instructions

have R0 fixed as their only usable register. R15 is used as the hardware stack pointer (SP). Saving

and recovering the status register (SR) and program counter (PC) in exception processing is

accomplished by referencing the stack using R15. Figure 2.1 shows the general registers.

R0*1

R10

R11

R12

R13

R14

R15, SP (hardware stack pointer)*2

R0 functions as an index register in the indirect indexed register addressing

mode and indirect indexed GBR addressing mode. In some instructions, R0

functions as a fixed source register or destination register.

R15 functions as a hardware stack pointer (SP) during exception processing.

Notes:

Figure 2.1 General Registers

SH7041A 데이터시트(PDF) 83 Page - Renesas Technology Corp