UPSD3422 datasheet(291/293 Pages) STMICROELECTRONICS

291 / 293 page

uPSD34xx

Important notes

291/293

34.12

Incorrect Code Execution when Code Banks are Switched

Description

When a code bank is switched, the PFQ/BC contain values from the previously selected

bank and are not automatically flushed and reloaded from the newly selected code bank.

Impact On Application.

Depending on the contents of the PFQ/BC when the code bank is switched, improper code

execution may result.

Workaround.

The PFQ/BC must be flushed when the code bank is changed. Disabling and re-enabling

the PFQ/BC will flush them. The following instructions are an example of how to flush the

PFQ/BC:

ANL

BUSCON,#03Fh

;Disable PFQ/BC

ORL

BUSCON,#0C0h

;Enable PFQ/BC

Bank switching is typically handled by tool vendors in a file called l51_bank.a51. The uPSD

tools offered by Keil and Raisonance now include an updated version of l51_bank.a51 for

the uPSD products that flushes the PFQ/BC. The most recent banking examples available

from ST's website include the updated l51_bank.a51 files.

34.13

9th Received Data Bit Corrupted in UART Modes 2 and 3

Description.

If the 9th transmit data bit is written by firmware into TB8 at the same time as a received 9th

bit is being written by the hardware into RB8, RB8 is not correctly updated. This applies to

both UART0 and UART1. Typically, the 9th data bit is used as a parity bit to check for data

transmission errors on a byte by byte basis.

Impact on Application.

UART Modes 2 and 3 can't be used reliably in full-duplex mode.

Workaround.

Revision A and B - Some options include:

Only use Mode 1 (8 data bits) for full-duplex communication.

Use Mode 1 and a packet based communication protocol with a checksum or CRC to

detect data transmission errors.

Use UART0 in mode 2 or 3 for transmitting data and UART1 in mode 2 or 3 for

receiving data.

Use some form of handshaking to ensure that data is never transmitted and received

simultaneously on a single UART configured in mode 2 or 3.

UPSD3422 데이터시트(PDF) 291 Page - STMicroelectronics

UPSD3422 데이터시트(HTML) 291 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL