UPSD3422 datasheet(47/293 Pages) STMICROELECTRONICS

47 / 293 page

uPSD34xx

Dual data pointers

47/293

Dual data pointers

XDATA is accessed by the External Direct addressing mode, which uses a 16-bit address

stored in the DPTR Register. Traditional 8032 architecture has only one DPTR Register.

This is a burden when transferring data between two XDATA locations because it requires

heavy use of the working registers to manipulate the source and destination pointers.

However, the uPSD34xx has two data pointers, one for storing a source address and the

other for storing a destination address. These pointers can be configured to automatically

increment or decrement after each data transfer, further reducing the burden on the 8032

and making this kind of data movement very efficient.

11.1

Data pointer control register, DPTC (85h)

By default, the DPTR Register of the uPSD34xx will behave no different than in a standard

8032 MCU. The DPSEL0 Bit of SFR register DPTC shown in Table 13, selects which one of

the two “background” data pointer registers (DPTR0 or DPTR1) will function as the

traditional DPTR Register at any given time. After reset, the DPSEL0 Bit is cleared, enabling

DPTR0 to function as the DPTR, and firmware may access DPTR0 by reading or writing the

traditional DPTR Register at SFR addresses 82h and 83h. When the DPSEL0 bit is set,

then the DPTR1 Register functions as DPTR, and firmware may now access DPTR1

through SFR registers at 82h and 83h. The pointer which is not selected by the DPSEL0 bit

remains in the background and is not accessible by the 8032. If the DPSEL0 bit is never set,

then the uPSD34xx will behave like a traditional 8032 having only one DPTR Register.

To further speed XDATA to XDATA transfers, the SFR bit, AT, may be set to automatically

toggle the two data pointers, DPTR0 and DPTR1, each time the standard DPTR Register is

accessed by a MOVX instruction. This eliminates the need for firmware to manually

manipulate the DPSEL0 bit between each data transfer.

Detailed description for the SFR register DPTC is shown in Table 13.

Table 13.

DPTC: data pointer control register (SFR 85h, reset value 00h)

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

–

DPSEL0

Bit

Symbol

R/W

Definition

–

Reserved

6AT

R,W

0 = Manually Select Data Pointer

1 = Auto Toggle between DPTR0 and DPTR1

5-1

–

Reserved

DPSE0

R,W

0 = DPTR0 Selected for use as DPTR

1 = DPTR1 Selected for use as DPTR

UPSD3422 데이터시트(PDF) 47 Page - STMicroelectronics

UPSD3422 데이터시트(HTML) 47 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL