전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

TMP93CS44 데이터시트(PDF) 120 Page - Toshiba Semiconductor

부품명 TMP93CS44
상세설명  CMOS 16-Bit Microcontroller
PDF  224 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  TOSHIBA [Toshiba Semiconductor]
홈페이지  http://www.semicon.toshiba.co.jp/eng
Logo TOSHIBA - Toshiba Semiconductor

TMP93CS44 데이터시트(HTML) 120 Page - Toshiba Semiconductor

Back Button TMP93CS44 Datasheet HTML 116Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 117Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 118Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 119Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 120Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 121Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 122Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 123Page - Toshiba Semiconductor TMP93CS44 Datasheet HTML 124Page - Toshiba Semiconductor Next Button
Zoom Inzoom in Zoom Outzoom out
 120 / 224 page
background image
TMP93CS44/S45
2004-02-10
93CS44-118
Figure 3.8.14 One-shot Pulse Output (without Delay)
2. Frequency measurement
The frequency of the external clock can be measured in this mode. The clock is
input through the TI4 pin, and its frequency is measured by the 8-bit timers
(Timer 0 and timer 1) and the 16-bit timer/event counter (Timer 4).
The TI4 pin input should be selected for the input clock of Timer 4. Set to
T4MOD<CAP12M1:0>
= 11. The value of the up counter is loaded into the capture
register CAP1 at the rise edge of the timer flip-flop (TFF1) of 8-bit timers (Timer 0
and timer 1), and into CAP2 at its fall edge.
The frequency is calculated by the difference between the loaded values in
CAP1 and CAP2 when the interrupt (INTT0 or INTT1) is generated by either 8-bit
timer.
Figure 3.8.15 Frequency Measurement
For example, if the value for the level “1” width of TFF1 of the 8-bit timer is set
to 0.5 seconds and the difference between CAP1 and CAP2 is 100, the frequency
will be 100
÷ 0.5 [s] = 200 [Hz].
TI4 pin input
(External trigger pulse)
c
Load the up counter value into capture
register 1 (CAP1). INT4 occurred
Match with TREG5
Timer output pin TO4
c
+ p
Pulse width
(p)
Inversion enable
Count clock
(Internal clock)
INTTR5 occurred
Load the up-counter value into
capture register 2 (CAP2).
Disables inversion caused by loading of
the up counter value into CAP2.
Enables inversion caused by
loading of the up counter
value into CAP1.
C1
C2
C1
C2
C2
C1
TFF1
Loading UC16 into CAP1
Count clock
(Internal clock)
Loading UC16 into CAP2
INTT0/INTT1



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com