L99PM72PXP datasheet(83/128 Pages) STMICROELECTRONICS

83 / 128 page

L99PM72PXP

ST SPI

Doc ID 023553 Rev 3

83/128

6.1.10

Read and Clear Status Operation

The ‘Read and Clear Status’ operation starts with a Command Byte followed 2 data bytes.

The number of data bytes is specified in the <SPI-frame-ID>. The content of the data bytes

is ‘don’t care’. The content of the addressed Status Register is transferred to SDO within the

same frame (‘in-frame response’) and is subsequently cleared.

A ‘Read and Clear Status’ operation with address 3FH clears all Status registers (incl. the

<Global Status> register). The Configuration Register is read by this operation.

OC0, OC1: operating code (10 for ‘read and clear status’ mode)

A0 to A5: address bits

Format of data shifted out at SDO during ‘Read and Clear Status’ operation

Table 61.

Read and clear status command format: command byte

MSB

LSB

Op Code

Address

Table 62.

Read and clear status command format: data byte 1

MSB

LSB

Table 63.

Read and clear status command format: data byte 2

MSB

LSB

Table 64.

Format of data shifted out at SDO during read and clear status: global

status register

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Global error

flag (GEF)

Communication

error

Not (chip reset OR

comm error)

TSD2

TSD1

V1 Fail

VS Fail

(OV/UV)

Fail

safe

Table 65.

Format of data shifted out at SDO during read and clear status:

data byte 1

MSB

Previous content of addressed register

LSB

D15

D14

D13

D12

D11

D10

L99PM72PXP 데이터시트(PDF) 83 Page - STMicroelectronics

L99PM72PXP 데이터시트(HTML) 83 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL