ATmega162 datasheet(137/324 Pages) ATMEL

137 / 324 page

137

2513K–AVR–07/09

ATmega162/V

Extended

Timer/Counter

Interrupt Flag Register

– ETIFR

(1)

Note:

1. This register contains flag bits for several Timer/Counters, but only Timer3 bits are described

in this section. The remaining bits are described in their respective Timer sections.

• Bit 5 – ICF3: Timer/Counter3, Input Capture Flag

This flag is set when a capture event occurs on the ICP3 pin. When the Input Capture Register

(ICR3) is set by the WGMn3:0 to be used as the TOP value, the ICF3 Flag is set when the coun-

ter reaches the TOP value.

ICF3 is automatically cleared when the Input Capture Interrupt Vector is executed. Alternatively,

ICF3 can be cleared by writing a logic one to its bit location.

• Bit 4 – OCF3A: Timer/Counter3, Output Compare A Match Flag

This flag is set in the timer clock cycle after the counter (TCNT3) value matches the Output

Compare Register A (OCR3A).

Note that a Forced Output Compare (FOC3A) strobe will not set the OCF3A Flag.

OCF3A is automatically cleared when the Output Compare Match A Interrupt Vector is exe-

cuted. Alternatively, OCF3A can be cleared by writing a logic one to its bit location.

• Bit 3 – OCF3B: Timer/Counter3, Output Compare B Match Flag

This flag is set in the timer clock cycle after the counter (TCNT3) value matches the Output

Compare Register B (OCR3B).

Note that a Forced Output Compare (FOC3B) strobe will not set the OCF3B Flag.

OCF3B is automatically cleared when the Output Compare Match B Interrupt Vector is exe-

cuted. Alternatively, OCF3B can be cleared by writing a logic one to its bit location.

• Bit 2 – TOV3: Timer/Counter3, Overflow Flag

The setting of this flag is dependent of the WGMn3:0 bits setting. In normal and CTC modes, the

TOV3 Flag is set when the timer overflows. Refer to Table 56 on page 130 for the TOV3 Flag

behavior when using another WGMn3:0 bit setting.

TOV3 is automatically cleared when the Timer/Counter3 Overflow Interrupt Vector is executed.

Alternatively, TOV3 can be cleared by writing a logic one to its bit location.

Bit

765

4321

ICF3

OCF3A

OC3FB

TOV3

–

–ETIFR

Read/Write

R/W

Initial Value

000

0000

ATmega162 데이터시트(PDF) 137 Page - ATMEL Corporation

ATmega162 데이터시트(HTML) 137 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL