 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
STA321 데이터시트(PDF) 63 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STA321 데이터시트(HTML) 63 Page - STMicroelectronics |
|
|
63 / 157 page  STA321 Fault detection and recovery Doc ID 15351 Rev 3 63/157 9 Fault detection and recovery 9.1 External amplifier When Fault is reported on pin EAFTN and bit EA_TSFT_ON of register FFXCFG2 on page 83 is active, then pin EATSN is reset to 0 and the embedded bridge outputs are put in the high-impedance state. When the fault signal disappears (that is, goes to 1) the embedded bridge is kept in 3-state for a time defined in register EATTF0-1 on page 86, after which time the outputs recover. 9.2 CMOS bridge When Fault is reported to the digital core and CB_TSFT_ON of register FFXCFG2 on page 83 is active then the tristate is activated thus putting the STA321 OUTn outputs in the high-impedance state. When the fault signal disappears, the CMOS bridge is kept in 3-state status for a time defined in register CBTTF0-1 on page 88, after which time the outputs recover. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
