UM0324 datasheet(90/105 Pages) STMICROELECTRONICS

90 / 105 page

Library functions

UM0324

90/105

ADC_IRQHandler

4.10

General purpose time base: 75x_TBtimer module

4.10.1

Overview

The purpose of the 75x_TBtimer module is to generate a time base that can be used by

the other modules of the applications.

4.10.2

List of available functions and interrupt service routines

The following is a list of available functions as listed in the 75x_ TBtimer.c source file:

●

TB_StartUpInit on page 91

●

TB_Timebase_Timer_Init on page 91

●

TB_Wait on page 92

●

TB_StartUp_Timeout_IsElapsed, TB_Delay_IsElapsed, TB_DisplayDelay_IsElapsed

on page 92

●

TB_Set_Delay_500us, TB_Set_DisplayDelay_500us, TB_Set_StartUp_Timeout on

page 92

●

TB_IRQHandler on page 93

Synopsis

void ADC_IRQHandler(void)

Description

The purpose of this function is to handle the ADC interrupt

request.

The end of the stator current conversions interrupt routine (JECH

in case of ICS, EOC in case of three shunt resistors) is used to

trigger execution of the IFOC algorithm. Moreover, the general

purpose conversions are also started in this ISR.

Input

None.

Returns

None.

Functions called

IFOC_Model

In THREE_SHUNT configuration: SVPWM_3ShuntGPADCConfig

In ICS configuration: IFOC_Model

UM0324 데이터시트(PDF) 90 Page - STMicroelectronics

UM0324 데이터시트(HTML) 90 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL