LAN9500AI datasheet(103/213 Pages) MICROCHIP

103 / 213 page

 2010 - 2015 Microchip Technology Inc.

DS00001875A-page 103

LAN950x

5.12.1.2

LAN9500A/LAN9500Ai Wake Detection Logic

A simplified diagram of the wake event detection logic for LAN9500A/LAN9500Ai is shown in Figure 5-33.

The functionality of GPIOs 0-6 and GPIOs 8-10 is slightly different. The functionality of GPIO7 is similar to that of GPIOs

0-6, with the additional requirement that it must cause a wakeup event when enabled for use in PHY Link Up detection.

GPIOs 8-10 are available for use in both internal and external PHY mode of operation. Their functionality is depicted in

Figure 5-36.

FIGURE 5-33:

WAKE EVENT DETECTION BLOCK DIAGRAM (LAN9500A/LAN9500AI)

Note:

Diagram does not represent actual hardware implementation.

Note:

GPIOs 0-7 are only available for use during internal PHY Mode of operation. The functionality of GPIOs 0-

6 is depicted in Figure 5-34, while that of GPIO7 is shown in Figure 5-35.

WOL_EN

(PMT_CTL Register)

WUPS[1]

(PMT_CTL Register)

SUSPEND0

ED_EN

(PMT_CTL Register)

WUPS[0]

(PMT_CTL Register)

WUEN

(WUSCR Register)

WUFR

(WUSCR Register)

MPEN

(WUSCR Register)

MPR

(WUSCR Register)

GPIO0_DET

GUEN

(WUSCR Register)

remote_wake

PFDA_EN

(WUSCR Register)

PFDA_FR

(WUSCR Register)

BCAST_EN

(WUSCR Register)

BCAST_FR

(WUCSR Register)

Good Frame

Received

SUSPEND1

SUSPEND2

SUSPEND3

WUFR

(WUSCR Register)

WUEN

(WUSCR Register)

GPIO10_DET

LAN9500AI 데이터시트(PDF) 103 Page - Microchip Technology

LAN9500AI 데이터시트(HTML) 103 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL