PM5347 datasheet(98/302 Pages) PMC

98 / 302 page

PM5347 S/UNI-PLUS

DATA SHEET

PMC-941033

ISSUE 6

SATURN USER NETWORK INTERFACE PLUS

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE

Bit

Type

Function

Default

Bit 7

MISCI

Bit 6

SSTBI

Bit 5

SPTBI

Bit 4

TACPI

Bit 3

RACPI

Bit 2

RPOPI

Bit 1

RLOPI

Bit 0

RSOPI

This register allows the source of an active interrupt to be identified down to the

block level. Further register accesses are required for the block in question to

determine the cause of an active interrupt and to acknowledge the interrupt

source.

RSOPI:

The RSOPI bit is a logic one when an interrupt request is active from the

RSOP block. The RSOP interrupt sources are enabled in the RSOP

Control/Interrupt Enable Register.

RLOPI:

The RLOPI bit is a logic one when an interrupt request is active from the

RLOP block. The RLOP interrupt sources are enabled in the RLOP Interrupt

Enable/Status Register.

RPOPI:

The RPOPI bit is a logic one when an interrupt request is active from the

RPOP block. The RPOP interrupt sources are enabled in the RPOP Interrupt

Enable Register.

RACPI:

The RACPI bit is a logic one when an interrupt request is active from the

RACP block. The RACP interrupt sources are enabled in the RACP Interrupt

Enable/Status Register.

PM5347 데이터시트(PDF) 98 Page - PMC-Sierra, Inc

PM5347 데이터시트(HTML) 98 Page - PMC-Sierra, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL