ST72344S2 datasheet(234/247 Pages) STMICROELECTRONICS

234 / 247 page

Device configuration and ordering information

ST72344xx, ST2345xx

234/247

Doc ID 12321 Rev 6

OPT3 = OSC RC Oscillator selection

0: RC oscillator on

1: RC oscillator off

OPT2 = DIV2EN PLL Divide by 2 enable

0: PLL division by 2 enabled

1: PLL division by 2 disabled

Note:

DIV2EN must be kept disabled when PLLx4 is enabled.

OPT1 = PLLx4x8 PLL Factor selection

0: PLLx4

1: PLLx8

OPT0 = PLLOFF PLL disable

0: PLL enabled

1: PLL disabled (by-passed)

These option bits must be configured as described in Table 122 depending on the voltage

range and the expected CPU frequency.

15.1.3

Option byte 2

Note:

OPT7:0 = Reserved. Must be kept at 1.

Table 121.

Selection of the resonator oscillator range

OSCRANGE

Typical frequency range

with Resonator

1~2 MHz

2~4 MHz

4~8 MHz

8~16 MHz

Reserved

External clock

Table 122.

List of valid option combinations

Target ratio

VDD

Option bits

DIV2 EN

PLL OFF

PLL x4x8

x4 (1)

For a target ratio of x4 between 3.3V - 3.65V, this is the recommended configuration.

2.7 V - 3.65 V

3.3 V - 5.5 V

001

101

ST72344S2 데이터시트(PDF) 234 Page - STMicroelectronics

ST72344S2 데이터시트(HTML) 234 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL