| 전자부품 데이터시트 검색엔진 |
|
AM79C978AVCW 데이터시트(PDF) 116 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM79C978AVCW 데이터시트(HTML) 116 Page - Advanced Micro Devices |
|
116 / 256 page ![]() 116 Am79C978A by H_RESET or S_RESET and is unaffected by the STOP bit. 9 MFCO Missed Frame Counter Overflow is set by the Am79C978A controller when the Missed Frame Counter (CSR112 and CSR113) has wrapped around. When MFCO is set, INTA is as- serted if IENA is 1 and the mask bit MFCOM is 0. This bit is always read/write ac- cessible. MFCO is cleared by the host by writing a 1. Writing a 0 has no effect. MFCO is cleared by H_RESET, S_RESET, or by setting the STOP bit. 8 MFCOM Missed Frame Counter Overflow Mask. If MFCOM is set, the MFCO bit will be masked and unable to set the INTR bit. This bit is always read/write ac- cessible. MFCOM is set to 1 by H_RESET or S_RESET and is not affected by the STOP bit. 7 UINTCMD User Interrupt Command. UINTCMD can be used by the host to generate an interrupt un- related to any network activity. When UINTCMD is set, INTA is asserted if IENA is set to 1. Write a 1 to UINT to clear UINTCMD and stop interrupts. This bit is always read/write ac- cessible. UINTCMD is cleared by H_RESET or S_RESET or by setting the STOP bit. 6 UINT User Interrupt. UINT is set by the Am79C978A controller after the host has issued a user interrupt command by setting UINTCMD (CSR4, bit 7) to 1. This bit is always read/write ac- cessible. UINT is cleared by the host by writing a 1. Writing a 0 has no effect. UINT is cleared by H_RESET or S_RESET or by setting the STOP bit. 5 RCVCCO Receive Collision Counter Over- flow is set by the Am79C978A controller when the Receive Col- lision Counter (CSR114 and CSR115) has wrapped around. When RCVCCO is set, INTA is asserted if IENA is 1 and the mask bit RCVCCOM is 0. This bit is always read/write ac- cessible. RCVCCO is cleared by the host by writing a 1. Writing a 0 has no effect. RCVCCO is cleared by H_RESET, S_RESET, or by setting the STOP bit. 4 RCVCCOM Receive Collision Counter Over- flow Mask. If RCVCCOM is set, the RCVCCO bit will be masked and unable to set the INTR bit. This bit is always read/write ac- cessible. RCVCCOM is set to 1 by H_RESET or S_RESET and is not affected by the STOP bit. 3 TXSTRT Transmit Start status is set by the Am79C978A controller whenever it begins transmission of a frame. When TXSTRT is set, INTA is as- serted if IENA is 1 and the mask bit TXSTRTM is 0. This bit is always read/write ac- cessible. TXSTRT is cleared by the host by writing a 1. Writing a 0 has no effect. TXSTRT is cleared by H_RESET, S_RESET, or by setting the STOP bit. 2 TXSTRTM Transmit Start Mask. If TXSTRTM is set, the TXSTRT bit will be masked and unable to set the INTR bit. This bit is always read/write ac- cessible. TXSTRTM is set to 1 by H_RESET or S_RESET and is not affected by the STOP bit. 1-0 RES Reserved locations. Written as zeros and read as undefined. CSR5: Extended Control and Interrupt 1 Certain bits in CSR5 indicate the cause of an interrupt. The register is designed so that these indicator bits are cleared by writing ones to those bit locations. This |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |