| 전자부품 데이터시트 검색엔진 |
|
AM79C978AVCW 데이터시트(PDF) 119 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM79C978AVCW 데이터시트(HTML) 119 Page - Advanced Micro Devices |
|
119 / 256 page ![]() Am79C978A 119 ble. As long as the Am79C978A controller is not reset while in suspend mode (by H_RESET, S_RESET, or by setting the STOP bit), no re-initialization of the device is required after the device comes out of suspend mode. The Am79C978A control- ler will continue at the transmit and receive descriptor ring loca- tions from where it had left, when it entered the suspend mode. This bit is always read/write ac- cessible. SPND is cleared by H_RESET, S_RESET, or by setting the STOP bit. CSR6: RX/TX Descriptor Table Length Bit Name Description 31-16 RES Reserved locations. Written as zeros and read as undefined. 15-12 TLEN Contains a copy of the transmit encoded ring length (TLEN) field read from the initialization block during the Am79C978A control- ler initialization. This field is writ- ten during the Am79C978A initialization routine. Read accessible only when ei- ther the STOP or the SPND bit is set. Write operations have no ef- fect and should not be per- formed. TLEN is only defined after initialization. These bits are unaffected by H_RESET, S_RESET, or STOP. 11-8 RLEN Contains a copy of the receive encoded ring length (RLEN) read from the initialization block during Am79C978A controller initializa- tion. This field is written during the Am79C978A initialization routine. Read accessible only when ei- ther the STOP or the SPND bit is set. Write operations have no ef- fect and should not be per- formed. RLEN is only defined after initialization. These bits are unaffected by H_RESET, S_RESET, or STOP. 7-0 RES Reserved locations. Read as 0s. Write operations are ignored. CSR7: Extended Control and Interrupt 2 Certain bits in CSR7 indicate the cause of an interrupt. The register is designed so that these indicator bits are cleared by writing ones to those bit locations. This means that the software can read CSR7 and write back the value just read to clear the interrupt condition. Bit Name Description 31-16 RES Reserved locations. Written as zeros and read as undefined. 15 FASTSPNDE Fast Suspend Enable. When FASTSPNDE is set to 1, the Am79C978A controller performs a fast suspend whenever the SPND bit is set. When a fast suspend is request- ed, the Am79C978A controller performs a quick entry into the suspend mode. At the time the SPND bit is set, the Am79C978A controller will complete the DMA process of any transmit and/or receive packet that had already begun DMA activity. In addition, any transmit packet that had started transmission will be fully transmitted, and any receive packet that had begun reception will be fully received. However, no additional packets will be transmitted or received and no additional transmit or receive DMA activity will begin. Hence, the Am79C978A controller may enter the suspend mode with transmit and/or receive packets still in the FIFOs or the SRAM. When FASTSPNDE is 0 and the SPND bit is set, the Am79C978A controller may take longer before entering the suspend mode. At the time the SPND bit is set, the Am79C978A controller will com- plete the DMA process of a trans- mit packet if it had already begun, and the Am79C978A controller will completely receive a receive packet if it had already begun. Additionally, all transmit packets stored in the transmit FIFOs and the transmit buffer area in the |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |