SH7041A datasheet(137/923 Pages) RENESAS

부품명	SH7041A

상세설명	Renesas 32-Bit Single-Chip RISC Microprocessor SuperH RISC engine Family/SH7040 Series(CPU Core SH-2)

PDF	923 Pages

Scroll/Zoom	100%

제조업체	RENESAS [Renesas Technology Corp]

홈페이지	http://www.renesas.com

Logo

137 / 923 page

Section 6 Interrupt Controller (INTC)

6.1

Overview

The interrupt controller (INTC) ascertains the priority of interrupt sources and controls interrupt

requests to the CPU. The INTC has registers for setting the priority of each interrupt which can be

used by the user to order the priorities in which the interrupt requests are processed.

6.1.1

Features

The INTC has the following features:

• 16 levels of interrupt priority: By setting the eight interrupt-priority level registers, the

priorities of IRQ interrupts and on-chip peripheral module interrupts can be set in 16 levels for

different request sources.

• NMI noise canceler function: NMI input level bits indicate the NMI pin status. By reading

these bits with the interrupt exception service routine, the pin status can be confirmed, enabling

it to be used as a noise canceler.

• Notification of interrupt occurrence can be reported externally (IRQOUT pin). For example, it

is possible to request bus rights if an external bus master is informed that a peripheral module

interrupt has occurred when the LSI has released the bus rights.

6.1.2

Block Diagram

Figure 6.1 is a block diagram of the INTC.

SH7041A 데이터시트(PDF) 137 Page - Renesas Technology Corp