SH7041A datasheet(235/923 Pages) RENESAS

부품명	SH7041A

상세설명	Renesas 32-Bit Single-Chip RISC Microprocessor SuperH RISC engine Family/SH7040 Series(CPU Core SH-2)

PDF	923 Pages

Scroll/Zoom	100%

제조업체	RENESAS [Renesas Technology Corp]

홈페이지	http://www.renesas.com

Logo

235 / 923 page

197

10.4.5

Refresh Timing

The bus state controller is equipped with a function to control refreshes of DRAM. CAS-before-

RAS (CBR) refresh or self-refresh can be selected by setting the RTCSR’s RMD bit.

CAS-before-RAS Refresh: For CBR refreshes, set the RCR’s RMD bit to 0 and the RFSH bit to

1. Also write the values in RTCNT and RTCOR necessary to fulfill the refresh interval prescribed

for the DRAM being used. When a clock is selected with the CKS2–CKS0 bits of the RSTCR,

RTCNT starts counting up from the value at that time. The RTCNT value is constantly compared

to the RTCOR value and a CBR refresh is performed when the two match. RTCNT is cleared at

that time and the count starts again. Figure 10.15 shows the timing for the CBR refresh operation.

The number of RAS assert cycles in the refresh cycle is set by the TRAS1, TRAS0 bits of the

DCR.

CASx

RAS

TRp

TRr1

TRr2

TRc

Figure 10.15 CAS-Before-RAS Refresh Timing (TRAS1, TRAS0 = 0, 0)

SH7041A 데이터시트(PDF) 235 Page - Renesas Technology Corp