 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
STM8S103F2 데이터시트(PDF) 107 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM8S103F2 데이터시트(HTML) 107 Page - STMicroelectronics |
|
|
107 / 121 page  DocID15441 Rev 14 107/121 STM8S103F2 STM8S103F3 STM8S103K3 Thermal characteristics 107 12.2 Selecting the product temperature range When ordering the microcontroller, the temperature range is specified in the order code (see Section 13: Ordering information). The following example shows how to calculate the temperature range needed for a given application. Assuming the following application conditions: Maximum ambient temperature TAmax= 75°C (measured according to JESD51-2), IDDmax = 8 mA, VDD = 5 V, maximum 20 I/Os used at the same time in output at low level with IOL = 8 mA, VOL= 0.4 V PINTmax = 8 mA x 5 V= 400 mW PIOmax = 20 x 8 mA x 0.4 V = 64 mW This gives: PINTmax = 400 mW and PIOmax 64 mW: PDmax = 400 mW + 64 mW Thus: PDmax = 464 mW. Using the values obtained in Table 58: Thermal characteristics on page 106 TJmax is calculated as follows: For LQFP32 60 °C/W TJmax = 75 °C + (60 °C/W x 464 mW) = 75 °C + 27.8 °C = 102.8 °C This is within the range of the suffix 6 version parts (-40 < TJ < 105 °C). Parts must be ordered at least with the temperature range suffix 6. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
