PIC16F88-ISLASHSS datasheet(90/214 Pages) MICROCHIP

90 / 214 page

PIC16F87/88

DS30487B-page 88

Preliminary

 2003 Microchip Technology Inc.

SSPSTAT: SYNCHRONOUS SERIAL PORT STATUS REGISTER (ADDRESS 94h)

R/W-0

R-0

SMP

CKE

D/A

P(1)

S(1)

R/W

bit 7

bit 0

bit 7

SMP: SPI Data Input Sample Phase bit

SPI Master mode:

= Input data sampled at end of data output time

= Input data sampled at middle of data output time (Microwire®)

SPI Slave mode:

This bit must be cleared when SPI is used in Slave mode.

I2C mode:

This bit must be maintained clear.

bit 6

CKE: SPI Clock Edge Select bit

SPI mode, CKP = 0:

= Data transmitted on rising edge of SCK (Microwire alternate)

= Data transmitted on falling edge of SCK

SPI mode, CKP = 1:

= Data transmitted on falling edge of SCK (Microwire alternate)

= Data transmitted on rising edge of SCK

I2C mode:

This bit must be maintained clear.

bit 5

D/A: Data/Address bit (I2C mode only)

In I2C Slave mode:

= Indicates that the last byte received was data

= Indicates that the last byte received was address

bit 4

P: STOP bit(1) (I2C mode only)

= Indicates that a STOP bit has been detected last

= STOP bit was not detected last

bit 3

S: START bit(1) (I2C mode only)

= Indicates that a START bit has been detected last (this bit is ‘0’ on RESET)

= START bit was not detected last

bit 2

R/W: Read/Write Information bit (I2C mode only)

Holds the R/W bit information following the last address match, and is only valid from address

match to the next START bit, STOP bit, or ACK bit.

=Read

= Write

bit 1

UA: Update Address bit (10-bit I2C mode only)

= Indicates that the user needs to update the address in the SSPADD register

= Address does not need to be updated

bit 0

BF: Buffer Full Status bit

Receive (SPI and I2C modes):

= Receive complete, SSPBUF is full

= Receive not complete, SSPBUF is empty

Transmit (in I2C mode only):

= Transmit in progress, SSPBUF is full (8 bits)

= Transmit complete, SSPBUF is empty

Note 1: This bit is cleared when the SSP module is disabled (i.e., the SSPEN bit is cleared).

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

- n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

PIC16F88-I/SS 데이터시트(PDF) 90 Page - Microchip Technology

PIC16F88-I/SS 데이터시트(HTML) 90 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL