AT90SCR100 datasheet(273/433 Pages) ATMEL

273 / 433 page

273

TPR0327AY–SMS–30Jan09

AT90SCR100

When the SPE bit is written to one, the SPI is enabled. This bit must be set to enable any SPI

operations.

• Bit 5 – DORD: Data Order

When the DORD bit is written to one, the LSB of the data word is transmitted first.

When the DORD bit is written to zero, the MSB of the data word is transmitted first.

• Bit 4 – MSTR: Master/Slave Select

This bit selects Master SPI mode when written to one, and Slave SPI mode when written logic

zero. If SS is configured as an input and is driven low while MSTR is set, MSTR will be cleared,

and SPIF in SPSR will become set. The user will then have to set MSTR to re-enable SPI Mas-

ter mode.

• Bit 3 – CPOL: Clock Polarity

When this bit is written to one, SCK is high when idle. When CPOL is written to zero, SCK is low

when idle. Refer to Figure 20-3 and Figure 20-4 for an example. The CPOL functionality is sum-

marized below:

• Bit 2 – CPHA: Clock Phase

The settings of the Clock Phase bit (CPHA) determine if data is sampled on the leading (first) or

trailing (last) edge of SCK. Refer to Figure 20-3 and Figure 20-4 for an example. The CPOL

functionality is summarized below:

• Bits 1:0 – SPR1, SPR0: SPI Clock Rate Select 1 and 0

These two bits control the SCK rate of the device configured as a Master. SPR1 and SPR0 have

no effect on the Slave. The relationship between SCK and the Oscillator Clock frequency clkIO is

shown in the following table:

Table 20-2.

CPOL Functionality

CPOL

Leading Edge

Trailing Edge

Rising

Falling

Rising

Table 20-3.

CPHA Functionality

CPHA

Leading Edge

Trailing Edge

Sample

Setup

1Setup

Sample

Table 20-4.

Relationship Between SCK and the Oscillator Frequency

SPI2X

SPR1

SPR0

SCK Frequency

clkIO/4

clkIO/16

clkIO/64

clkIO/128

clkIO/2

AT90SCR100 데이터시트(PDF) 273 Page - ATMEL Corporation

AT90SCR100 데이터시트(HTML) 273 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL