| 전자부품 데이터시트 검색엔진 |
|
TLK6002 데이터시트(PDF) 81 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TLK6002 데이터시트(HTML) 81 Page - Texas Instruments |
|
81 / 96 page ![]() TLK6002 www.ti.com SLLSE34 – MAY 2010 • Periodically Check Device Operational Mode Status (Non-Errored Read Values Shown Below): – Read 5 CHANNEL_STATUS_1 and verify the following bits: • 5.14 AZ_DONE (1’b1) (per channel) • 5.13 AGC_LOCKED (1’b1) (per channel) • 5.9 ENCODE_INVALID (1’b0) (per channel) • 5.8 DECODE_INVALID (1’b0) (per channel) • 5.7 TX_FIFO_UNDERFLOW (1’b0) (per channel) • 5.6 TX_FIFO_OVERFLOW (1’b0) (per channel) • 5.5 RX_FIFO_UNDERFLOW (1’b0) (per channel) • 5.4 RX_FIFO_OVERFLOW (1’b0) (per channel) • 5.2 LOS (1’b0) (per channel). This read value is only useful if the serial input is guaranteed to be above 150mVdfpp. • 5.1 CHANNEL_SYNC (1’b1) (per channel) • 5.0 PLL_LOCK (1’b1) (per channel) – Read 14.15:0 ERROR_COUNTER[15:0] and verify it is 0 (per channel) 4.19 JITTER TEST PATTERN GENERATION AND VERIFICATION PROCEDURES Use one of the following procedures to generate and verify the respective test patterns. It is assumed that an appropriate external cable has been connected between serial outputs and serial inputs. No external parallel side connections are necessary. 4.19.1 IEEE802.3 Clause 36A Based Continuous Random Pattern (CRPAT) Long/Short Test Pattern: • Reset Device: – Issue a hard or soft reset (RESET_N asserted –or- Write 1 to 0.15 GLOBAL_RESET) • Select SERDES Reference Clock Input: – If REFCLK_0_P/N used - Ensure REFCLK_A_SEL (or REFCLK_B_SEL if channel B is used) primary input pin is low – If REFCLK_1_P/N used - Ensure REFCLK_A_SEL (or REFCLK_B_SEL if channel B is used) primary input pin is high • Ensure a legal reference clock operation frequency is selected based on Appendix B (Continuous Rate Device Configuration), and provision CHANNEL_CONTROL_1 register accordingly. • Serial Configuration – Configure the following bits per the desired application: • 1.9:8 (LOOP_BANDWIDTH[1:0]) • 2.12:8 (TWPOST1[4:0]) • 2.7:4 (TWPRE[3:0]) • 2.3:0 (SWING[3:0]) • 8.14:12 (EQPRE[2:0]) • 8.11:10 (CDRTHR[1:0]) = 2’b01 • 8.9:8 (CDRFMULT[1:0]) = 2’b00 • 1.3:0 PLL_MULT[3:0] • 1.7:6 RATE_TX[1:0] (CRPAT supported only in half/quarter/eighth rate modes • 1.5:4 RATE_RX[1:0] (CRPAT supported only in half/quarter/eighth rate modes). • Check SERDES PLL Status for Locked State – Poll 5.0 PLL_LOCK (per channel) until it is asserted (high). • Toggle ENRX – Write 1’b0 to 20.2 (ENRX) Copyright © 2010, Texas Instruments Incorporated ELECTRICAL SPECIFICATIONS 81 Submit Documentation Feedback Product Folder Link(s): TLK6002 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |