| 전자부품 데이터시트 검색엔진 |
|
705-5100-F21 데이터시트(PDF) 29 Page - Magnetrol International, Inc. |
|
|
|||||||||||||||||||||||||||||
705-5100-F21 데이터시트(HTML) 29 Page - Magnetrol International, Inc. |
|
29 / 52 page ![]() LO_LO_LIM: Value of the lower limit of alarms. HI_HI_ALM: State of the upper limit of alarms. HI_ALM: State of the upper limit of warnings. LO_ALM: State of the lower limit of warnings. LO_LO_ALM: State of the lower limit of alarms. SIMULATE: For commissioning and test purposes, the input value of the Transducer Block in the AI Block can be modified. OUT_UNIT_TEXT: Allows the user to write text if a spe- cific unit of the OUT parameter is not in the code list. The TRANSDUCER and AI Block’s actual mode in the MODE_BLK parameter must be set to AUTO to pass the PV Value through the AI to the network. Transducer scaling, called PV_SCALE, is applied to the PV from the CHANNEL to produce the FIELD_VAL in percent. Units of PV_SCALE are the same as the units of the TRANSDUCER BLOCK process variable comfigured by channel. Damping Filter is a feature of the AI Block. PV_FTIME parameter is the time constant of a single exponential filter for the PV, in seconds. This parameter can be used to dampen out fluctuation in level due to excessive turbulence. The AI Block has multiple ALARM functions that monitor the OUT parameter for out of bound conditions. 4.5.2 Local Display of Analog Input Block Output Values The Model 705 3x PROFIBUS PA™ [Device Revision 2] transmitter incorporates a feature that allows the device’s Analog Input [AI] Block Out values to be displayed on the local LCD. NOTE: There are many reasons that AI Block Out values can deviate from the measurement value originating in the Transducer block, and because the keypad and local display will only pro- vide access to Transducer block parameters, there is no way to explore or change the other fieldbus configuration items affect- ing the AI Block output using the keypad and LCD. These screens should only be considered as measured value indicators for configured transmitters. • The screens are not used for commissioning or diagnostic / troubleshooting purposes. • Prior to configuration of AI Blocks, the value displayed will not reflect the transducer measurement. (Pre-configuration values will typically be 0). 29 57-645 Eclipse Guided Wave Radar Transmitter - PROFIBUS PA™ |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |