705-5100-F21 datasheet(8/52 Pages) MAGNETROL

8 / 52 page

57-645 Eclipse Guided Wave Radar Transmitter - PROFIBUS PA™

2.1.2 Configuration Information

Some key information is needed to configure the

Eclipse transmitter. Complete the following operating

parameters table before beginning configuration.

Display

Question

Answer

Probe Model

What probe model is listed on the

model information?

(first four digits of probe model number)

_____________

Probe Mount

Is the probe mounted NPT, BSP,

or flange?

_____________

Measurement

What is the desired measurement? Choices

Type

are: Level only, Volume, Interface Level

or Interface Level and Volume.

_____________

Probe Length

What probe length is listed on the

model information?

(last three digits of probe model number)

_____________

Level Offset

The desired level reading when the

liquid is at the end of the probe.

_____________

Dielectric

What is the dielectric constant range

of the process medium? (Lower layer

dielectric for interface applications)

_____________

2.2

QuickStart Mounting

NOTE: Confirm the configuration style and process connection

size/type of the Eclipse transmitter. Ensure it matches the

requirements of the installation before continuing with the

QuickStart installation.

x Confirm the model and serial numbers on the nameplates

of the Eclipse probe and transmitter are identical.

For applications using the Model 7xS steam probe, it is

mandatory to keep the transmitter and probe matched

as a set.

2.2.1 Probe

y Carefully place the probe into the vessel. Align the probe

process connection with the threaded or flanged mounting

on the vessel.

{

}

705-5100-F21 데이터시트(PDF) 8 Page - Magnetrol International, Inc.

705-5100-F21 데이터시트(HTML) 8 Page - Magnetrol International, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

데이터시트 다운로드

링크 URL