TNETX3100PGC datasheet(34/80 Pages) TI1

부품명	TNETX3100PGC

상세설명	ThunderSWITCHE 10-PORT 10-/100-MBIT/S ETHERNETE SWITCH

PDF	80 Pages

Scroll/Zoom	100%

제조업체	TI1 [Texas Instruments]

홈페이지	http://www.ti.com

Logo

34 / 80 page

TNETX3100

ThunderSWITCH™ 10-PORT 10-/100-MBIT/S ETHERNET™ SWITCH

SPWS031D – JUNE 1997 – REVISED OCTOBER 1997

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

LED control register at 0x00D1

BIT

Reserved

FLTLED

PONLY

S4LED

S3LED

S2LED

S1LED

Initial Values After Reset

BIT

NAME

FUNCTION

7–6

Reserved

FLTLED

Fault LED. When FLTLED = 1, the fault LED is turned on. When FLTLED = 0, the fault LED turns on if an invalid

CRC is detected during the EEPROM load.

PONLY

Partition only. If PONLY = 1, the port LEDs display the enable/disable status of the ports; the display of port activity

and link status is disabled.

3–0

S4LED

S3LED

S2LED

S1LED

Software-controlled LEDs. S4LED–S1LED control the state of the external software-controlled LEDs; when

SxLED = 1, the corresponding LED is turned on, when SxLED = 0, the LED is off. The TNETX3100 makes no use

of the value of these bits other than for controlling the external LEDs.

TNETX3100PGC 데이터시트(PDF) 34 Page - Texas Instruments